Silicone Soft Touching Spraying Coating Ink Cured At High Temperature
Product Description
PT-0455 is two parts
Part A: Silicone resin
Part B: Platinum catalyst
The Silicone soft touch coating mainly used outside coating on the cured silicone rubber surfaces,
cured at high temperature (180~220℃).Characterized by smooth feeling, friction resisting, dust
proof, well covering strength and adhesion strength.
Application
Mainly used for silicone baby bib, silicone comb and other silicone products.
Processing
1.Mix Silicone resin, Platinum catalyst and Solvent (toluene) at weight ratio: Silicone
resin:Platinum catalyst:Solvent=100: 2~3: 300~500
( for example, 100 grams Silicone resin, 2~3 grams Platinum catalyst mixing 300~500 grams
Solvent ) . Mixing Silicone resin and Platinum catalyst first, stir evenly,then mix Solvent , stir
evenly for 5~10 minutes.
2. Please filter with 300 mesh filter screen for two times before spraying.
3. The maximum working time is 12 hours after mixing coating PT-0455.
4. Please keep working temperature at 22℃ and keep constant humidity in working process.
All the above physical data only for reference.
Baking method
A.Oven:Baking at 180℃ for 20 minutes
B. IR Conveyer belt: Baking at temperature 220℃ for 7 minutes
Attention
1. This coating including volatile solvent, please keep ventilating and far away from
heat and open flame.
2. Avoid skin contact for a long time and vapor inhalation.
3. Washing with soap once skin contact.
Storage
Stored at room temperature for 6 months without any mixing.
Packing
1KG/Bottle.
